Back to productsproducts.html

Current Spyder  A and -B

- Lowers the external field around your power cord

- Lowers the negative effects from existing fields in your hi-fi environment

- Very transparant sound due to at least 50% less contact joints compared to multiple sockets

- Protects your equipment by the Pulse Protector inside

Clever Thinking!

The idea is simple: a power cord with at one end a single power plug and at the other end three cables with IEC connectors.

These three cables have a length of 20, 30 and 40cm or 3x 40cm, so if you have a stacked set of equipment the Current Spyder L will hang down without taking a lot of space behind your set.

The result: reduced cable mess and much better performance.

The Current Spyder L (on purpose with y, just because we like it) is

equipped with a Pulse Protector to protect your valuable system.

The primary cable is available in two lengths (75 and 150cm) and the secondary cables are available in lengths of 20, 30 and 40cm or 3x 40cm.

So when ordering a Current Spyder L you can choose from four types.

Working principle

Without noticing we are in a very polluted environment. Everywhere around us fields arise from currents flowing through conductors, signals from radio stations/mobile phones and other communication networks. Electromagnetic interference is not visible to us,  it's just there. Each device using energy causes fluctuations on the network in the form of peaks or surges, or causes a variation in the electromagnetic fields in the air. The effects occur around the device itself and on its mains supply, but even far away from the device the fields are still measurable. This can only be measured with suitable equipment, not with our ears.

Common thought is that shielded power cords protect the connected devices better against influences from outside, and that is true. But much more important is that the field created by the fluctuating current inside the power cord itself does not reach interlinks in the neighbourhood. Interlinks transport small signals to audio devices with a high input resistance. This high input resistance makes equipment extremely sensitive for interferences.

Many power cords for audio purposes look beautiful, just like ours. But appearance is not all! The Current Conductor is a dual shielded cable. The outside shield is NOT braided steel (a steel screening does not function as a shield but is meant to protect the cable against physical force). Instead, the Current Conductor has a braided high density COPPER screen with tin protection against oxidation. Under the tinned copper shielding lies a 100% closed aluminium foil for suppression of high frequencies. In contradiction to a synthetic foil, this solution works!

The three stranded wires are suitable to conduct high currents without resistive losses (the losses of energy in the form of heat). The earth wire is connected at both sides, the shield is only connected at the feeding side, as it is supposed to be. Finally, we gave the plug a nice CNC machined hood.

Where to use?

The Current Spyder not only makes audio sets perform better, it also reduces the visible mess. The relationship with your life-partner will become much better. Probably you can give hints to have this for your birthday!

The Current Spyder is designed to feed audio equipment standing on top of each other. Thus the Spyder will hang down and disappear behind the set while lowering the external fields.

When in doubt: just contact us. We will be pleased to answer your questions.

Current Spyder A

Current Spyder B

Current Spyder A

What to expect?

The result of experimenting with power cords can vary from small changes to big surprises. The most heard improvement is the quietness in silent parts of the music as well as more noticeable details and more holographic soundstage.


Current Spyder A75

Current Spyder A150

Current Spyder B75

Current Spyder B150

Choose out of four different types:

Current Spyder A75, primary 75cm, secundary 20, 30, 40cm

Current Spyder A150, primary 150cm, secundary 20, 30, 40cm

Current Spyder B75, primary 75cm, secundary 3x 40cm

Current Spyder B150, primary 150cm, secundary 3x 40cm

before :-(

after :-)

€ 199,00

€ 225,00

€ 209,00

€ 235,00


Protecting Phase-Neutral, Fase-Earth

     and Neutral-Earth

Maximum voltage: 250 Volt

Maximum peak voltage: 2500 Volt

Maximum peak current: 4500 Ampere

Maximum peak energy: 3x65 Joule

Response time: <25 nanoseconds

Maximum current per output: 2 Ampere

Maximum total current: 2 Ampere